LPF830nm Long Wave Pass Filter

Long wave communicationoptical filter（Longpass Filters）， There are other names, such as high pass filter, long wave filter, long wave filter, long pass filter, etc. Of course, filter is a term used in the digital photography industry. Its optical characteristics are the same, that is, high transmittance of light in the long wave direction, while light in the relatively short wave direction is cut off. It belongs to a type of cut-off filter, which is used in optical precision instrumentsLong wave pass filterIts cut-off depth is more stringent than that of photographic filters, and its quality is also higher.

Ruicheng Optoelectronics' LPF830nm long wave pass filter has a peak transmittance of 50% at the wavelength point of 830nm, achieving complete cutoff of visible light from 850-1800nm with high transmittance (>90%) and complete cutoff at 200-810nm, with a cutoff depth of OD6. The measured spectral curve in the attachment shows that this filter has high steepness and high transmittance. Compared with ordinary products on the market, its advantages are very obvious.

Technical Parameters:

Process: Ion vacuum hard film process;

Material: Schott BF33;

Effective wavelength range: 200nm~1800nm;

Incident angle: 0 degrees;

Peak transmittance (T peak):>90%;

Blocking depth: OD6;

Starting wavelength (lambda; cut on): 840nm;

Dimension: 60 * 60 * 2mm can be cut into circular or square shapes according to customer size requirements;

Surface quality: 40/20;

Surface parallelism:λ /4；

Actual measured spectral curve: